Changelog

Every Dry Fire Pro release, documented.

Dry Fire Pro 2.5.1

Latest

Choose how a shot is fired in Target Practice — no more racking a striker-fired pistol after every target:

  • Trigger click — as before: press the trigger and the microphone hears the click
  • Say “bang” — fire with your voice. The shot is timed from the instant you start the word, and any short, sharp word works. Set how loud it has to be with Voice Sensitivity in Settings › Activities
  • Hold on target — keep your sights on the dot until its ring fills. Completely silent; a dot you don’t hold within 5 seconds counts as a miss
  • Pick your way before your first drill, switch any time from the chip under the target, or in Settings › Activities
  • Each run remembers how it was fired, shown in its result and in History

New drills, and a library that’s easier to find your way around:

  • Four standard drills — 3-3-3 (three shots, three yards, three seconds), the Tueller Drill (draw and fire two in 1.5 s), the 5×5 (five shots in five seconds) and Cold Draw (one draw, no warm-up). Each comes with its well-known standard
  • The drill library, grouped by skill — Fundamentals, First Shot, Splits, Transitions and Standards, the same words your Statistics use, so it’s clear which drills train what

Dry Fire Pro 2.5.0

Our biggest update yet — the app now shows not just what you did, but how you’re improving:

  • Statistics, rebuilt — your first shot, splits and transitions as averages you can trust, with how much they vary and whether they’re getting faster. Tap any of them for its own chart
  • Every drill timed as a whole — each drill’s total time, its average and its best, with a “New best” moment right after the run that beats it
  • What you train — see which skill gets the fewest reps, and jump straight into the drill that trains it
  • 12 weeks at a glance — a training calendar across every mode, with your streak and your best streak
  • History for every mode in one place — drills, Trigger Control and Target Practice, filtered and compared with your average
  • Session details, clearer — every shot labelled as first shot, split, transition or miss, against your usual times
  • Share your stats as posters — your numbers, your progress since you started, your training calendar, Trigger Control and Target Practice
  • Ammo Saved — how much money dry fire saves you, from a price per caliber in your own currency. On HQ, after each drill, and on its own screen
  • Free Fire — an open-ended shot timer: shoot as long as you like and get every split
  • Share custom drills — send any drill you’ve built by link or QR code; your friend imports it in one tap
  • Arrange HQ your way — reorder, hide and bring back its sections
  • Trigger Control and Target Practice now wear their own colours across the app
  • All your training history carries over unchanged

Dry Fire Pro 2.4.1

Small update, focused on the moments after a drill:

  • Not detecting well? When most shots in a drill time out, the session result now offers a quick way to fix detection — straight to troubleshooting, and to me if that doesn’t help
  • Session results fit smaller iPhones — the sheet now sizes itself to its content, so nothing gets cut off on an iPhone SE
  • Turn session results off from the result itself — tap ⓘ next to the title; you can switch them back on in Settings › Activities › Drills
  • A fresh look for the developer note in Settings
  • Smaller polish and fixes

Dry Fire Pro 2.4.2

Detection that trusts your trigger, not the room:

  • Background Filter — the app now ignores faint sounds that only look like a trigger click, like a running 3D printer or gym equipment. It’s on by default; adjust it (or turn it off) in Settings › Trigger Sound, where each level is explained in plain words
  • Target Practice hears every shot — fast pairs and quick follow-up shots now count, and a shot is no longer thrown away when the marker flickers at the break
  • Detection recovers by itself — after switching models or an audio interruption, listening picks up again without leaving the screen
  • New troubleshooting fixes — “It counts shots I didn’t take” raises the filter in one tap; “Hear quieter triggers” lowers it
  • Model confidence moves under Advanced in Trigger Sound — most issues are fixed with the filter or another model
  • Voice commands in Target Practice now follow the voice setting in Settings › Activities
  • A new Pro icon in HQ and Settings

Dry Fire Pro 2.4.0

The biggest update yet — a second Aim mode, and a fresh look for everything you train with:

  • New Target Practice — prop your phone up across the room and shoot at the targets it shows. The camera follows the marker on your muzzle and places every shot where your sights were when the trigger broke. Drills are scored on hits and time, and every run is saved to HQ and Stats
  • Redesigned drills — every built-in drill opens with an animated preview of its targets, cues and moves, and has its own icon across the app. The library, Drill Detail, Drill Tweaker and Drill Builder all share the new look
  • Edit your custom drills — open any drill you’ve built and change it in the builder (Pro)
  • Aim setup in two steps — put the marker on and pick its size on one screen, then a live camera check confirms your marker is found before your first rep
  • How it works, with video — each Aim mode has a guide, and its walkthrough plays right on the page
  • Stats for every activity — Drills, Trigger Control and Target Practice each get their own page; swipe between them
  • A cleaner Settings — grouped by what each setting controls: the trigger sound and the marker are set once and shared by every activity that uses them
  • Message the developer — a direct, anonymous line to me from Settings, with an optional email if you’d like a reply, and the option to attach your detection setup when something isn’t working
  • Better marker detection — sensitivity now adjusts to your lighting automatically, and warm indoor light no longer hides the sticker
  • Hall of Fame, redesigned to celebrate the people who support the app
  • Fixed a crash when opening Trigger Control right after launching the app, and voice commands that stopped working after leaving the Aim tab
  • Plus a long list of smaller polish and fixes

Dry Fire Pro 2.3.2

Aim gets easier to learn — and a printable upgrade:

  • 3D-printable muzzle mount — print our free mount for sharper, more consistent tracking; preview it in 3D and grab the model from Aim setup or Settings
  • Clearer Aim instructions — the final setup step now walks you through the whole rep: aim at the dot, tap start, and break the shot the moment you hear the beep
  • Minor UI polish across the app

And in the works: a full Aim demo & instructions video — it will show up right in the app the day it’s ready.

Dry Fire Pro 2.3.1

A round of polish for Stats and Aim:

  • Tidy up your history — delete whole sessions or individual shots straight from Stats, and your averages and records update instantly
  • Session detail, refreshed — a cleaner shot-by-shot breakdown for both drill and Aim sessions
  • Session Summary toggle — skip the post-drill recap and go straight back to training (find it in Drill Setup)
  • Fixed a crash when opening the Aim camera on some devices

Dry Fire Pro 2.3.0

Speed was only half the story. Now you can measure the other half.

  • New Aim mode — put a small sticker on your muzzle, prop the phone in front of you, and the front camera measures exactly how far the gun moves as you break the shot
  • Trigger control verdict — jerking, anticipating the shot, heeling, tightening your grip, too much or too little trigger finger: Aim reads the direction your reps drift and names the fault, with the evidence behind it
  • The fix — every verdict comes with the correction and a drill that trains it
  • Estimated impact — see where that press would have landed on a target at your chosen distance, so a few millimetres of movement stops being abstract
  • Muzzle Drift — a lifetime plot of every rep around the centre, so a consistent pull shows up as a pattern rather than a feeling
  • Hands-free — say “go” to start the next rep without touching the phone
  • Metric or imperial — every measurement follows your choice, from setup to results
  • Aim sessions count toward your streak, training calendar and stats, right alongside drills
  • Everything runs on device. No recording, no upload — the camera never leaves your phone
  • Plus the usual round of polish and fixes

Dry Fire Pro 2.2.0

Build the habit, dial in detection, train harder.

  • Training calendar — a dot on HQ for every day you’ve trained; swipe through past weeks or open the full month view, and tap any day to revisit its sessions
  • Training reminders — pick your days and we’ll nudge you to keep the streak alive
  • My Firearm, reworked — a guided, step-by-step walkthrough trains the app on your own trigger sound for more reliable detection
  • Troubleshooting — tell us what feels off (missed shots, detecting too early, reacting too late) and get a guided, one-tap fix
  • New drills added to the library
  • Plus the usual round of polish and fixes

Dry Fire Pro 2.1.1

  • Refreshed Pro plans and upgrade experience
  • Statistics screen refinements
  • General under-the-hood improvements and minor fixes

Dry Fire Pro 2.1.0

Your training, measured better.

  • Post-drill summary — your results pop up the moment a drill ends: average, best shot, and misses at a glance
  • Session detail — tap any past session in Stats for a full shot-by-shot breakdown with charts
  • Smarter stats — missed shots are now tracked separately and no longer skew your averages (community requested!)
  • Your Record — every drill now shows your personal best, average, sessions and last practice
  • Looped drills now save to your history when you stop
  • Quick actions — long-press any drill to select or favorite it instantly
  • “Listening” indicator during drills so you always know detection is active
  • Restore Purchases is now available in Settings
  • Plus a full visual polish pass across Stats, the drill gallery and Settings

Dry Fire Pro 2.0.0

The biggest update yet.

  • All-new HQ tab — day streak, weekly stats and your average reaction time at a glance
  • Favorites — star the drills you run most and re-run past sessions in one tap
  • Drill of the Day — a fresh pick every day
  • New tab bar: HQ, Train, Stats & Settings

Dry Fire Pro 1.9.0

Detection, personalized.

  • My Firearm — train a detection model on your own trigger sound in Detection & Sensitivity
  • New shorter beep sounds
  • Lower sound suppression delay

Dry Fire Pro 1.8.0

Tune detection to your setup.

  • New detection settings section
  • Adjust detection sensitivity to your environment
  • Configurable holster-draw delay
  • New Hall of Fame

Dry Fire Pro 1.7.1

  • New anonymous Quick Feedback feature — shape the roadmap from inside the app
  • Bug fixes

Dry Fire Pro 1.6.1

  • Universal Gen2 model is now the default — faster and more precise detection
  • General UI improvements based on community feedback
  • Microphone sensitivity improvements
  • Bug fixes

Dry Fire Pro 1.5.1

  • New QuickShots (Beta) faster detection model
  • Drill selection stays persistent after an app restart
  • General sound detection improvements

Dry Fire Pro 1.4.4

  • Added a helpful tutorial to guide new users through the app
  • Cleaned up Settings for a more intuitive experience
  • Minor visual and performance enhancements

Dry Fire Pro 1.4.3

  • Fixed Light mode color issues
  • Other minor bug fixes and improvements

Dry Fire Pro 1.4.2

  • Improved the onboarding
  • More consistent UI across the app
  • Minor tweaks and adjustments

Dry Fire Pro 1.4.1

  • Share your stats to track and compare progress
  • Polished UI for a smoother experience
  • Fixed bugs and improved overall performance

Dry Fire Pro 1.4.0

A new Statistics feature to track training progress:

  • View all finished drills in one place
  • See progress over time with detailed graphs
  • Access lifetime statistics for deeper insights

Dry Fire Pro 1.3.0

  • New Beta detection model for improved accuracy
  • Remove specific reaction times from a session for more flexibility

Dry Fire Pro 1.2.0

  • New Holster Detection Model option in Settings for draw-from-holster training
  • Optimized design for iOS 26 for smooth performance and compatibility

Dry Fire Pro 1.1.0

  • Drill Builder is here: create and customize your own drills to match your training style
  • Performance improvements and bug fixes for a smoother experience
  • Design updates

Dry Fire Pro 1.0.3

  • Improved sound volume for a better training experience
  • Updated our contact email address

Dry Fire Pro 1.0.2

  • Squashed a few gremlins and patched up the system

Dry Fire Pro 1.0.1

  • Fixed issues with the Contact Us form

Dry Fire Pro 1.0.0

The first release of Dry Fire Pro — a modern shot timer built for dry-fire practice:

  • Tap start, hear the beep, react — on-device machine learning detects your trigger press
  • Realistic dry fire drills with reaction-time tracking
  • No subscription required at launch — free core with an optional one-time unlock